Inverters
UPS
LPG Gas Gysers
RO Systems
Stabilisers
Radient Heaters
Batteries
 
Home
 
 
  Pure Sine wave Series
 
  Capacity : << Back to Inverters
600VA/12V, 800VA/12V, 1400VA/24V  
     
Features for sine wave  
 
Micro controller based design with dsp technology
Pure sine wave output
SMPS based battery charger, charges battery from 110V onwards
Charger based on three stage algorithm (boost,absorption and float)
Selectable charging current can be varied from 5 amps to 11 amps.
Complete overload and short circuit protection with facility to run highly inductive loads.
Automatic overload reset for mild overload conditions
Closed loop regulated sine wave output from no load to full load
Soft start inverter mode for cold starting inductive loads.
Compact double sided pth design.
Fan provided for cooling.( heat sink temprature dependant)
   
Technical Specifications for sine wave
 

input/AC range

 : 110V-280V
Input DC Range    
Single battery  : 10V-14V
Double battery    : 20V-28V
Transfer time   : < 70 ms
Wave form  : Sine wave
Frequency   : 50 Hz +/- 0.5
Efficiency   : > 90%
Power Factor : 0.8
Charger   : Multistage intelligent charging, bulk mode,absorption, pulse and time based pulse.
Protection  : Short circuit, Low and high voltage cut off.
   
  Applications :
 
All electrical/electronic appliances which are operating on electricity board supply.
   
 

Copyright © 2004-2005 Voyagerworld.net All right Reserved